ADDRESS
- GREEN READYMADE STEEL PRODUCTS INDIA PRIVATE LIMITED
-
Survey number 55/2A, Jayamangala Village,
Malur Taluk, Kolar District,
Karnataka, Pincode- 563130. - Email: sunil@greenrms.com
- Phone: +91-7760988043, +91-7760988044
Since cutting & bending process are done at GRMS Center using latest technology there is reduced overlapping at Joints, the material wastages at the site becomes zero. We undertake complete control on steel waste.
GRMS is delivered on an "On Time in Full" policy; i.e. it will be delivered within 7 to 15 days after finalization of the design thereby significantly reducing pressure at the project manager's end to adhere to deadlines.
Owing to its customized design and "On time in full" delivery pattern, GRMS is present just in time at site on requirement. This not only reduces the amount of space you need to utilize for keeping rebars, it also helps you in saving costs associated with wastage and labor.
The machines use to make GRMS can transform any rebar into a shape you envision. You can now have the freedom to design complex columns, pillars, ceilings being worry free on the rebar to be used.
GRMS brings with it a design suited to the project requirements thereby reducing the cost involved in cutting and bending by the laborers. GRMS also keeps your inventory costs to a minimum owing to the "On time in Full" delivery policy so that you save on real estate and overhead associated with wastage.
Laborers at a construction site essentially perform two functions involving rebars; cutting and bending and tying. GRMS will significantly reduce the dependence on the laborers for cut and bend activities.
GRMS is made from Virgin iron ore giving it superior strength and ductility than the secondary steel rebars in the market. It is also cut and bent by high precision machines making it the best in class in the category of ready to use rebars.
GRMS is available in various lengths and diameters. Usually, the practice is to procure rebar for each requirement, then cut and bend at a later stage. Utilizing GRMS, you ensure that the procurement of rebars is inherently taken care of.
GRMS can be easily managed and its different shapes can be easily recognized with the use of identification tags.
The economic benefits of GRMS extend well beyond significantly reduced placement and overall construction costs. The faster a building is erected, the sooner it can start earning a return on its owner's investment.
In the traditional way, cut and bend process is done manually by bar benders with little precision and hand tools to roughly meet the shape requirement for a particular section. This process is inefficient, can lead to wastage as the delivery of the rebars takes place in straight form. The leftovers post cut and bend is usually left for scrap.
With GRMS, you get precise cut and bend rebars, as per your requirement, made from state-of-the-art machines without the hassle of scrap disposal. The scrap is procured at the GRMS facility leaving our customers worry free on the selling/reselling of scrap.
| Advantage | Traditional Way | GRMS Way | |
|---|---|---|---|
 |
Procurement of rebars | Once design and BBS are received, it would require a Project Manager to look into everything from procurement of straight bars to getting them cut & bend in the required shape and doing a check | In GRMS way, all the required sections of rebars are available. This will be managed either through the existing inventory at site or else by fresh procurement. Procurement of rebar supply is internally buffered and managed at the GRMS Centre. |
 |
Quality Check | Rebars received might not go through quality check, and the quality of rebars may not be consistent due to multiple vendors. | With GRMS all you need to do is pick up the phone and place your order on the basis of your BBS and rest of the steps are internally managed by the GRMS facility. GRMS shapes are made only by high quality rebars providing the shapes the best and consistent raw material quality. |
 |
Detailing to Bar benders | The project manager has to do micro-management from understanding the BBS to instructing the labors on the required quantity, measurement, angle of bend and production schedule for the cut and bend shapes. | Understanding the BBS and technical detailing is done on the computer and fed into machines to get accurate shapes and sizes of cut and bend products. |
 |
Cutting & Bending | Cutting and bending is done manually hence bringing in inefficiencies. The length of rebar is manually measured providing a higher chance of inaccuracy. The cut is forcibly done and would not be clean and hence quality is compromised at every stage. | With GRMS method, Rebars are sheared through a shearing system which measures the length to be cut accurately. The shearing mechanism is an instant one that gives a clean finish to the cut rebars. The angles at which rebar have to be bent is internally controlled by the machine providing accurate bend angles. |
 |
Stocking & Accounting | Cut and bend products need to be manually sorted and arranged which becomes a challenge. | In the GRMS way products are well tagged and then loaded and delivered. The tagging ensures the ease in accounting and stocking of the cut & bend shapes. |
 |
Wastages & Scarp disposal | Wastages turns out to be a major headache as straight rebars do not come in the required sizes. Disposal of scrap generated during cutting & bending is an extra hassle. | Availability of raw material in different sizes and an accurate & optimized production process ensures minimal wastage in ready build way and hence doing away with disposal of scrap. |
GRMS strongly believes in bringing cutting edge technology and we are collaborating with leading technology equipment manufacturers from Italy to be the equipment suppliers for the Rebar plant based on very close consideration of various factors.
The GRMS facility customize the lengths of the rebars and bend them at required angles in accordance with the project's blueprint. It is capable of making the common shapes stirrups to complex helical shapes.
Prima 12-R Automatic Stirrup bender is a specialist coil machine which is used to make stirrups of different shapes. It uses the coils of sizes 8mm-12mm. Making rings stirrups and all shapes sizes & decoiling have never been so easy.
The SHEAR LINE 300 rebar shearing, storage & transfer system is a specialist cutting machine that organizes and cuts the rebar to required length with extreme precision. Bars of size ranging from 8-50mm are processed in this system. It is one of the best Storage and transfer system for straight bars.
The ROBOMASTER 45/12 Automatic Rebar Bending System is a bending machine that gives rebar the required shape by bending rebars at required angles. It can bend rebars of all sizes ranging from 8mm-40mm.
The SHEAR LINE 300 rebar shearing, storage & transfer system is a specialist cutting machine that organizes and cuts the rebar to required length with extreme precision. Bars of size ranging from 8-50mm are processed in this system. It is one of the best Storage and transfer system for straight bars.